How to Replace Elastic in Cloth Diapers

The elastic on cloth diapers is integral for keeping them snug and comfortable. It is important to know how to replace elastic in cloth diapers. But, as with any material, the elastic may wear out over time—especially if you have a baby who likes to move around a lot!

How to Replace Elastic in Cloth Diapers

Fortunately, replacing elastic in cloth diapers doesn’t have to be a daunting task. With a few simple steps and some basic supplies, you can quickly and easily replace your diaper’s worn-out elastic. 

Materials You Will Need

  • Any brand of elastic
  • Needle
  • Thread
  • Scissors

How to Choose the Right Type of Elastic for Your Diapers?

There are several different types of elastic available on the market, and it can be tricky to know which one to choose for your diapers. The most important factor to consider is the width of the elastic. Narrow elastics are best for light-duty applications, such as for delicate fabrics or for areas that don’t bear much weight. Wide elastics are stronger and can better support heavier fabrics or larger body types. 

Another factor to consider is the material of the elastic. latex and silicone are both popular choices, but latex may cause an allergic reaction in some people. Finally, you’ll need to decide on the level of stretch that you need.

Low-stretch elastics are good for areas that don’t need a lot of give, such as around the leg openings, while high-stretch elastics are better for areas that need to expand, such as around the waist. With so many factors to consider, it’s important to take your time and choose the right type of elastic for your needs.

How to Replace Elastic in Cloth Diapers: A Step-by-Step Guide 

Step 1: Gather Supplies 

Before you start the process of replacing elastic in your cloth diaper, you need to gather the necessary supplies. You will need a pair of scissors, an iron or sewing machine (depending on the type of elastic you are using), new pieces of elastic for the diaper legs and waistband, pins or clips, and thread that matches the color of your diaper fabric.

Once you have all these materials gathered together, you are ready to begin. 

Matches the Color of Your Diaper Fabric

Step 2: Remove Old Elastic 

The important step is to remove any existing elastic from your diaper. Start by cutting away the old elastic from both leg openings with scissors. If you do not have any scissors handy, you can use a seam ripper to gently remove the elastic.

For the waistband, carefully snip away any existing threads that are securing it in place. Once this is done, use an iron or sewing machine to remove any remaining pieces of elastic from the waistband. Be sure to remove all traces of old elastic before moving on to the next step! 

Step 3: Measure Elastic 

Once you have removed all of the old elastic, it’s time to measure and cut your new elastic. Measure both leg openings and the waistband, making sure that the new elastic is slightly longer than what was originally used. Cut each piece of elastic accordingly using scissors. 

Step 4: Attach New Elastic 

Now it’s time to attach new pieces of elastic to your cloth diaper. Measure out pieces of new elastic that are slightly longer than each leg opening and waistband area—this will help ensure that they fit properly when stretched around your baby’s body.

Use pins or clips to hold down each piece of new elastic along each edge before stitching them into place with thread that matches your diaper fabric color. Make sure not to pull too tightly when stitching; otherwise, it could cause discomfort when worn by your baby! 

Step 5: Test the Fit 

Once you have finished stitching the new elastic into place, it’s important to test out the fit before using your diaper. Stretch the waistband and leg openings and make sure they are snug but not too tight.

If needed, adjust the elastic by either adding more or taking away some stitches until you achieve a secure yet comfortable fit. There are many methods for doing this, so be sure to do your research and find the one that works best for you. 

Step 6: Use the Diaper

Once you are satisfied with the fit of your diaper, it’s time to put it to use! Your cloth diaper should now have a snug and secure fit that ensures your baby is comfortable while wearing it. Properly replacing the elastic in your cloth diaper will help ensure that it lasts and holds up over multiple uses.

Ensures Your is Comfortable While Wearing It

If any time you find that the elastic is wearing out again, simply follow these steps to replace it and your diaper will be good as new!

Replacing the elastic in cloth diapers is a straightforward process.

With the right materials and instructions, you should be able to quickly and easily replace the worn-out elastic on any of your cloth diapers. Enjoy using your newly-elasticized cloth diaper!

Tips on proper Replacement

  1. Cut the old elastic out of the diaper using a sharp pair of scissors.
  2. Measure the length of elastic needed to replace the old elastic. Add 1 inch to this measurement to allow for overlap.
  3. Cut the new elastic to the desired length.
  4. Pin one end of the new elastic to one end of the diaper, making sure that the pins are perpendicular to the fabric.
  5. Sew the pinned end of the elastic in place using a zigzag stitch or a serger stitch.
  6. Try on the diaper to make sure that it fits properly. Adjust as needed.
  7. Wash and dry the diaper according to the manufacturer’s instructions before using it again.

Frequently Asked Questions

How to Sew in New Elastic for a Snug and Secure Fit?

If your clothes are starting to feel a little loose in the waist, it may be time to sew in some new elastic. This is a fairly easy process that anyone with a needle and thread can do. Here are the steps:

  1. Cut a piece of elastic that is about an inch shorter than the waistband of your clothing.
  2. Thread one end of the elastic through a needle, and then sew it to the inside of the waistband.
  3. Stretch the elastic as you sew it around the entire waistband. Make sure that you keep the elastic tight so that it will provide a snug and secure fit.
  4. Once you have sewn all the way around, knot the end of the elastic and trim any excess threads.
Keep the Elastic Tight

By following these simple steps, you can easily sew in new elastic and give your clothes a custom-fit look and feel.

How to Test the Fit of Your Newly-Elasticized Diaper?

Although disposable diapers have come a long way in recent years, even the best brands can sometimes leave much to be desired in the fit department – particularly around the legs. This can cause leakages and discomfort for your little one, so it’s important to make sure you’ve got a good fit before you put that diaper on your baby. Here’s how to test the fit of your newly-elasticized diaper:

  1. First, put the diaper on your baby and have them move around in it for a few minutes to see if there are any gaps or areas where the diaper isn’t snug against their skin.
  2. Next, take a look at the elastic around the legs. If it’s too loose, you’ll see red marks on your baby’s skin where the leg gussets are digging in – this is a sign that the diaper is too big and needs to be adjusted.
  3. Finally, check the waistband of the diaper. It should be snug but not too tight, and you should be able to slide two fingers underneath it easily. If it’s too loose, your baby will likely experience leaks.

If you follow these simple steps, you can be confident that your baby’s diaper is fitting well and won’t cause any leaks or discomfort.

How Do You Change a Wiggly Diaper?

Most parents will agree that changing a diaper is one of the least pleasant aspects of parenting. But it’s a necessary evil, and it’s important to know how to do it correctly to minimize the mess and the risk of infection. So, how do you change a wiggly diaper?

First, lay your baby down on a clean, flat surface. If you’re using a changing table, make sure that the straps are secure and that the table is at a comfortable height for you. If you’re not using a changing table, you can lay a towel or blanket on the floor. Next, unfasten the dirty diaper and lift your baby’s legs slightly. 

This will help to prevent any accidents. then, use one hand to hold the diaper in place while you use the other hand to clean your baby with wipes.

Be sure to clean both the front and back of your baby’s bottom. Once your baby is clean, put on a clean diaper. Use the adhesive tabs to secure it in place, making sure that it’s not too tight or too loose. And that’s it! With a little practice, changing diapers will become second nature.

You Can Check It Out Strip Cloth Diapers with Vinegar and Baking Soda

Use the Adhesive Tabs to Secure It


Replacing elastic in cloth diapers does not have to be a difficult task—with this simple guide, it can be quite easy! You should carefully determine how to replace elastic in cloth diapers. All you need are some basic materials such as scissors, an iron or sewing machine (depending on which type of elastics you’re using), new pieces of elastics for both legs, etc. 

So if you find yourself needing to replace worn-out elastics in one or more of your cloth diapers – don’t worry – just follow these steps and soon enough your diapers will be as good as new again! Happy diapering!

You Can Check It Out How Should Diapers Fit

Photo of author

Loren Jones

Hi, my name is Loren. I live with my husband and 4 lovely kiddos in the Eastern part of San-fransisco. I have a smart beautiful,curious 6 year old daughter, a handsome 11-year-old son, an intelligent and tech geek 15 years old son and a creative, artistic 12-year-old stepson. With each of my kids being five years apart, I feel that I’m now continually phasing in and out of each stage of parenting! I’ve learned a lot about the way children learn and behave, especially in a school setting with regards to curriculum. I enjoy sharing that insight through my writing and hope that it can help others.