Are your mornings filled with too much stress, trying to replace your Owlet Sensor so you can finally rest easy knowing that you’re baby is safe and sound? Worry no more – replacing an Owlet Sensor is easier than you think! In this blog post on how to replace owlet sensor, we are here to help guide you through the process step-by-step for a hassle-free experience.
Whether it’s from wear and tear or an ever-curious toddler, having to replace your Owlet sensor doesn’t have to add extra anxiety to your day. Make sure you read on as we detail how quickly and easily replacing the sensor can be done in no time at all!
Needed Tools and Materials
Given below is the list of tools that you will need for replacing your Owlet Sensor.
- Owlet Replacement Pads (2 Pieces)
- A Small Screwdriver
- Non-latex Gloves (Optional)
- Phillips Head Screw (if Applicable)
- Isopropyl Alcohol Wipe
11 Step-by-step Guide on How to Replace Owlet Sensor
Step 1: Clean the Area
Make sure that the area in which you will be working is clean and free of debris. Using an Isopropyl Alcohol wipe, gently clean the area where the Owlet Sensor will be placed. It is important to make sure that the device is free of any dirt or dust before continuing. But be careful not to scratch your baby’s delicate skin. It is recommended to wear non-latex gloves while cleaning the area.
Step 2: Attach New Owlet Pads
Take the two new Owlet Sensor replacement pads and attach them in their designated slots on either side of the device. Make sure they are securely in place and that there is no gap between them. This will ensure your baby’s safety when using the Owlet Sensor. You can use the small screwdriver to help you properly secure the pads in place.
Step 3: Unscrew the Back Plate
Using a Phillips head or small screwdriver, carefully unscrew the back plate from the bottom of the device. Be careful not to damage the screws or the back plate itself.
Once unscrewed, set aside and be careful not to misplace it. This will make reassembly easier. It is important to take your time as you don’t want to damage the parts of the device. It is recommended to use a non-magnetic screwdriver for this step.
Step 4: Remove the Existing Sensor Pad
Gently pull the existing sensor pad from each slot on either side of the device. Dispose of them according to local regulations and replace them with two new ones previously attached. But make sure to not misplace the screws that were used to attach them.
It is important to make sure that the new replacement pads are securely in place before continuing. It is recommended to use a small screwdriver or tweezer for this step.
Step 5: Place the New Sensor Pads
When replacing the Owlet Sensor pads, make sure they are properly aligned in each slot and that no gaps exist between them. This will ensure your baby’s safety when using the Owlet Sensor. This step requires patience and due care to ensure a proper attachment. It is important to make sure that the new replacement pads are securely in place before continuing.
Step 6: Secure the Back Plate
Once the new sensor pads are in place, securely screw the back plate to the bottom of the device. But make sure not to over-tighten the screws as they may damage or break the device.
It is important that you take your time and be careful while reassembling the back plate. This ensures your baby’s safety when using the Owlet Sensor. You can use a Phillips head or a small screwdriver for this step. It is recommended to use a non-magnetic screwdriver for this step.
Step 7: Clean Up
Using an Isopropyl Alcohol wipe, clean off any dirt or debris that may have accumulated during the replacement process. Make sure that all surfaces are free of dirt and dust before using the Owlet Sensor again. Otherwise, the device may not work as intended.
But be careful not to scratch your baby’s delicate skin. It is recommended to wear non-latex gloves while cleaning the area. But be careful not to over-clean as too much wiping can damage the device and make it unusable. If necessary, use a soft cloth to gently wipe the device and its parts.
Step 8: Power On the Device
Once you have cleaned up the area, power on the device. Make sure that all components are functioning properly before proceeding with use. You can tell if the device is working by listening for a beep and observing any lights that may come on. It is important to make sure that all parts are securely in place and functioning before continuing.
Step 9: Test the Owlet Sensor
Before using the Owlet Sensor again, it is important to test its functionality. Place it on your baby’s foot and ensure that it is securely in place. Make sure the device is properly displaying readings for your baby’s heart rate and oxygen levels.
You can also test the device’s temperature sensor to make sure it is providing accurate readings. Do a few tests with various settings to ensure that the device is functioning properly.
Step 10: Monitor Readings
Once the Owlet Sensor has been tested, monitor the readings for any changes or inconsistencies. If you notice any abnormalities, do not hesitate to reach out to a doctor for further assessment. This will ensure your baby’s safety when using the Owlet Sensor. Also, it is important to make sure that you are regularly cleaning and maintaining the device to keep it in optimal working condition.
Step 11: Enjoy!
And that’s it! You have successfully replaced the Owlet Sensor and can now rest easy knowing your baby is safe and sound. Enjoy the peace of mind that comes with having an accurate monitoring system in place for your little one. Always remember to be attentive and monitor the device’s readings for any changes or irregularities. Doing this will ensure your baby’s safety when using the Owlet Sensor.
Following these simple steps on how to replace owlet sensor will ensure that replacing your Owlet Sensor is easy and stress-free. It is important to make sure you always have a spare Owlet Sensor on hand so that you can replace it quickly and efficiently if need be. With this guide in mind, you’ll be able to keep your baby safe without any hassle whatsoever!
Do You Need Professional Support?
If you require any assistance in replacing the Owlet Sensor, don’t hesitate to contact a professional. They will be able to help you with the process step-by-step and ensure your baby’s safety when using the Owlet Sensor. It is important that you always seek out professionals for any technical matters related to the device. This way, you can guarantee your baby’s safety and get the most out of your Owlet Sensor.
Frequently Asked Questions
Q: What Tools Do I Need to Replace My Owlet Sensor?
A: You will need a small screwdriver, two pieces of Owlet replacement pads, a Phillips head screw (if applicable) and an Isopropyl alcohol wipe. It is also recommended to use non-latex gloves when handling the device.
Q: How Often Should I Replace My Owlet Sensor?
A: Depending on your baby’s activity level, it is recommended to replace your Owlet Sensor every 6 – 12 months for optimal accuracy and performance. Please contact customer service if you have any further questions.
Q: What Should I Do if the Owlet Sensor Does Not Function Properly After Replacement?
A: If you experience any issues after replacing your Owlet Sensor, please contact customer service for assistance. We are here to help make sure that your baby is safe and sound!
Q: I Replaced My Owlet Sensor, But It Still Isn’t Working Properly. What Should I Do?
A: If your Owlet Sensor is still not functioning properly after replacement, please contact customer service for assistance. We are here to help you get the most out of your device and make sure that your baby is safe and sound!
Conclusion
Replacing the Owlet Sensor is a great way to ensure your baby’s safety while sleeping. Not only will it alert you to any potential complications, but it can also give you the peace of mind that comes from knowing that you’ve done everything possible to keep them safe.
Following the steps outlined above will have your Owlet Sensor up and running in no time, allowing you to rest easy knowing that your little one is being monitored.
With so many benefits, it’s no wonder why parents everywhere are turning to this advanced yet simple technology when looking for ways to protect their babies. After all, when it comes to safeguarding our precious little ones, nothing should ever be left up to chance! Thanks for reading this article on how to replace owlet sensor.
