How to Fix Infant Optics Out of Signal Coverage

Do you have an Infant Optics baby monitor? If so, you may have experienced times when the signal goes out. Don’t worry; you’re not alone. This is a common issue with these monitors. In this post, I’m going to show you how to fix the problem. Keep reading for more information.

How to Fix Infant Optics Out of Signal Coverage

When you’re a new parent, there are so many things to worry about, and one of them is making sure your baby has a good-quality monitor. If you have an Infant Optics monitor, there’s a good chance you’ve been having trouble with the signal coverage. Here are some tips on How to Fix Infant Optics Out of Signal Coverage.

What is Signal Coverage?

Signal coverage refers to the strength and reach of the wireless connection between your Infant Optics monitor and the camera. A strong signal means clear audio and video transmission, while a weak or absent signal can result in distorted or lost communication.

You may experience signal coverage issues due to a variety of factors, such as distance between the monitor and camera, interference from other electronic devices, or even physical obstacles like walls and furniture.

It’s important to address signal coverage issues as they can affect the overall effectiveness of your baby monitor and potentially put your child’s safety at risk.

What Causes Infant Optics in Signal Coverage?

There are many possible causes for an Infant Optics monitor to lose signal coverage. Such as:

1. Physical Obstructions

If the camera is obstructed by an object, such as a large tree or building, it may be unable to receive a clear signal from the monitor. It can cause the signal to be weak or completely cut off.

However, make sure that the camera is placed at an optimal angle, as obstructions in front or behind it can also cause signal coverage issues.

2. Interference from Other Electronic Devices

Electronic devices, such as routers, cordless phones, and wireless security systems, may interfere with the signal of an Infant Optics monitor. This can cause the signal to become choppy or drop entirely.

3. Poor Signal Strength on the Monitor

If your monitor is placed too far away from the camera, it may not be able to receive a strong signal. This can cause intermittent loss of coverage or complete drop-outs. This can be overcome by simply moving the monitor closer to the camera or repositioning the camera itself.

4. Low Battery Power

The monitor may lose signal coverage if the batteries are running low and need to be replaced. Be sure to regularly check and replace the batteries to maintain a consistent signal.

Needed Tools and Materials:

Try Moving Your Monitor

Before we dive into the solutions, let’s make sure you have the necessary tools and materials on hand:

A Screwdriver (if Needed to Adjust Camera Position):

If you need to adjust the position of your camera, you may need a screwdriver. Depending on the specific model of your Infant Optics monitor, it may require a Phillips or flathead screwdriver.

A Power Source:

Make sure your monitor and camera are both connected to a power source, whether it’s through a wall outlet or batteries. Weak batteries can also contribute to signal coverage issues, so be sure to check them regularly.

A Clear Path:

Ensure that there are no physical obstacles or interference between the monitor and camera. This will help ensure a strong and uninterrupted signal.

How to Fix Infant Optics Out of Signal Coverage in 7 Easy Steps

Step 1: Check the Location of Your Infant Optics Monitor

If possible, try moving your monitor to another location in your home or space where you usually spend time with your baby. This could be a different room, such as the nursery or living room, or even outside on your patio or balcony. Depending on the layout of your home and the placement of your Infant Optics monitor, this may help alleviate the signal coverage issues and restore a stronger connection between you and your baby.

You can also try elevating the monitor and placing it on a shelf or bookcase rather than directly on the ground.

Consider Looking Into Different Baby Monitors

Step 2: Adjust the Settings on Your Infant Optics Monitor

If your monitor currently has its default settings, try adjusting these to help improve signal quality. Options may include increasing or decreasing the strength of the signal, changing how often data is sent between parent and baby, and reducing the amount of noise or interference on your monitor. Experiment with different settings to find the best combination for your specific needs.

It’s also a good idea to make sure your monitor and camera are both updated with the latest firmware. This can often improve signal coverage issues.

Step 3: Clean the Lens on Your Infant Optics Monitor

Another potential solution to fix signal coverage issues with your Infant Optics monitor is to clean the lens. This may involve using a soft, lint-free cloth to gently wipe away any dirt, dust, or debris that may be blocking your camera’s lens. A clear lens can help improve the overall quality and strength of the signal.

You can also try adjusting the angle of the camera to ensure it’s not pointing too high or low, which can also cause signal coverage problems.

Step 4: Reset Your Infant Optics Monitor to Its Default Settings

If the previous steps haven’t solved your signal coverage issues, try resetting your monitor to its default settings. Depending on the model of your monitor, this may involve pressing and holding a combination of buttons on the device until the screen turns off. Once the device has reset, try adjusting the settings as recommended in Step 2.

But be sure to check your user manual or contact Infant Optics customer support for specific instructions on how to reset your monitor.

Step 5: Update Your Infant Optics App or Software

If you’re using an app to connect with your Infant Optics monitor, make sure that it is up-to-date and matches the current version of your monitor’s software. This can often be done by going to your app’s or monitor’s settings, locating the “Update” option, and following the onscreen prompts to complete the process.

You can also check the Infant Optics website for any firmware updates for your specific model. The latest software may help improve signal coverage issues.

Step 6: Contact Infant Optics Support for Additional Help

If you’re still experiencing issues with signal coverage on your Infant Optics monitor, you may want to contact their support team for additional assistance. They may be able to offer in-depth troubleshooting steps or help you exchange your monitor for a newer model that better suits your needs.

You can reach Infant Optics customer support through the website, email, or phone number listed on their website.

Step 7: Consider Purchasing a Different Baby Monitor If All Else Fails

If none of these steps have resolved your signal coverage issues, you may want to consider looking into different baby monitors on the market. There are many models available that offer a wide range of features and functions, so it’s important to do some research and find one that works best for you and your baby.

Consider Investing in a Repeater Device

It’s also a good idea to read reviews and ask for recommendations from other parents who have had similar experiences with signal coverage issues on their own baby monitors. This can help you make an informed decision and find the right solution for your specific need. Remember, every baby and family is different, so what works for one may not necessarily work for another.

Following these steps and being patient may help you overcome signal coverage issues with your Infant Optics monitor. Remember to regularly check and maintain your monitor’s settings, clean the lens, and replace batteries as needed to ensure a strong and reliable connection between parent and baby. And don’t hesitate to reach out for additional support if needed. Happy monitoring!

Some Additional Tips to Fix Infant Optics Out of Signal Coverage

1. Do Not Place the Baby Monitor in a Place Where There Is a Lot of Interference

If your baby monitor is experiencing interference from other devices or sources, try moving it to another location where there is less interference. This could help improve the signal quality and fix any issues with coverage. You can also try turning off other devices that may be causing interference, such as microwaves or cordless phones.

2. Check Your Battery Levels

If you notice that your baby monitor is frequently losing its signal, it may be due to low battery levels. Be sure to check the batteries regularly and replace them as needed. Also, make sure that the batteries are fully charged before use. The strength of the signal may be affected if the batteries are low or not charged properly.

3. Keep Your Monitor and Camera Clean

If your baby monitor is covered in dust or dirt, it may not be able to pick up signals as effectively as it should. To prevent this issue, regularly clean both your camera and monitor screen with a soft cloth, making sure to remove any buildup of dirt or debris. The cleaner your monitor and camera are, the better quality signal you will receive.

4. Check Your Connection Settings

In some cases, your baby monitor may be showing poor signal coverage simply because there is a problem with the connection settings. To fix this issue, try adjusting the settings to improve signal quality, such as changing the frequency channel or using a different Wi-Fi network. You can also try resetting the connection to see if that helps.

5. Try Using an Extender or Repeater

If your baby monitor is still struggling with poor coverage, you may want to consider investing in a repeater device or extender that can boost signal strength and ensure that you always have a clear line of communication with your baby. It’s important to research and choose a reputable brand, as well as make sure the device is compatible with your specific model of baby monitor.

Make Sure That All Connections Are Secure

By following these tips, you can typically fix any issues you may be experiencing with your Infant Optics baby monitor out of signal coverage. With just a little bit of effort and some patience, you should be able to restore reliable coverage and keep your child safe and sound. Good luck!

Do You Need to Take Help From Professionals?

In most cases, following the steps and tips outlined above should help you fix any signal coverage issues with your Infant Optics monitor. However, if none of these solutions work or you are still having trouble, it may be time to seek help from professionals.

You can contact Infant Optics customer support for more in-depth troubleshooting and assistance. They may also offer warranty services or help you exchange your monitor for a new one if necessary.

Additionally, you may want to consult with a professional technician or IT specialist who can help you diagnose and fix any technical issues that may be causing poor signal coverage on your monitor. They may also be able to provide recommendations for alternative solutions or ways to improve signal strength in your home.

How Much Will It Cost?

The cost of fixing signal coverage issues on your Infant Optics monitor will depend on the specific problem and the solution you choose. In most cases, following the steps above or seeking help from customer support should not incur any additional costs.

However, if you need to purchase a repeater or extender, this can range from $20-$100, depending on the model and brand. If you need to consult with a professional technician, they may charge an hourly rate for their services.

Overall, fixing signal coverage issues on your Infant Optics monitor should not be a costly endeavor, and many problems can be resolved without spending any additional money.  So don’t hesitate to seek help if needed to ensure that you have a reliable and strong connection with your baby.


What Can I Do If My Infant Optics Monitor Is Out of Signal Coverage?

One possible solution to out-of-signal coverage issues with your Infant Optics monitor is to relocate the monitor or move the wireless receiver. This can often help improve reception and provide a stronger connection between your monitor and the base station. You can also try changing the channel or resetting the connection settings to see if that helps.

What Precautions Can I Take to Avoid Signal Issues with My Infant Optics Monitor?

In addition to relocating your monitor or receiver, there are a few other things you can do to minimize the risk of signal issues with your Infant Optics monitor. For example, try keeping your monitor away from common sources of interference, such as cordless phones, wireless routers, or other electronic devices. You may also want to consider using a signal booster or extender if your monitor still doesn’t seem to be working correctly.

Can I Use a Different Brand of Monitor with My Infant Optics Base Station?

While it is generally not recommended, you may be able to use a different brand of monitor with your Infant Optics base station. However, keep in mind that you may need to perform additional setup or configuration steps in order for this to work properly, so be sure to consult the manufacturer’s documentation or online support resources for more information.

Why is My Monitor Constantly Losing Its Signal?

There are several potential reasons why your Infant Optics monitor may be experiencing frequent signal loss. Some common causes include low battery levels, interference from other electronic devices, dirty equipment, or incorrect connection settings. Following the tips outlined in this guide can help you identify and address these issues to improve your monitor’s signal strength.  If the problem persists, consider contacting customer support for further assistance.

If you continue to experience problems with your Infant Optics monitor, it may be best to reach out to customer support for further assistance. They can help you troubleshoot your system and determine the best course of action for resolving any issues that you are experiencing.


If your infant optics are out of signal coverage, there are a few things you can do to try and fix the issue. You can check for firmware updates, make sure that all connections are secure, and move any metal objects away from the unit. If these things don’t work, you may need to purchase a new infant optic unit.

Infant Optics out of signal coverage can be a real pain. By following the tips in this article about how to fix infant optics out of signal coverage, you should be able to fix the problem quickly and easily. If you have any other questions or problems, feel free to reach out to us for help by commenting below. We’re always happy to assist our readers in any way we can!

You Can Check It Out Change Temp on Infant Optics

Photo of author

Loren Jones

Hi, my name is Loren. I live with my husband and 4 lovely kiddos in the Eastern part of San-fransisco. I have a smart beautiful,curious 6 year old daughter, a handsome 11-year-old son, an intelligent and tech geek 15 years old son and a creative, artistic 12-year-old stepson. With each of my kids being five years apart, I feel that I’m now continually phasing in and out of each stage of parenting! I’ve learned a lot about the way children learn and behave, especially in a school setting with regards to curriculum. I enjoy sharing that insight through my writing and hope that it can help others.

Leave a Comment