How to Remove Squeaker From Dog Toy

A squeaker from a dog toy is a small plastic or rubber disc that creates an audible squeak when pressed. It’s usually found at the center of plush and other soft toys intended for dogs. Though it can be entertaining, some pet owners find these noises annoying and eventually want to remove the squeaker.

The process may seem daunting at first, but with the right tools and a bit of patience, you can take out a squeaker without damaging your pet’s toy.

How to Remove Squeaker From Dog Toy

Many people don’t know how to remove squeakers from their dog’s toys. Here is a quick and easy guide on how to do it. First, find the seam of the toy where the plastic is joined together. Second, use a pair of pliers to grip one end of the seam and pull it apart.

You should now see the stuffing and the squeaker. Third, reach into the toy and remove the squeaker. Fourth, put the toy back together by reversing the process. In this blog post, You will learn in detail how to remove squeaker from dog toy.

Step-by-Step Processes for How to Remove Squeaker From Dog Toy 

Step 1: Inspect the Toy

Before you do anything, examine the toy to determine how it was made and if there are any seams or loose pieces. If a seam can be opened with a knife or scissors, proceed to the next step. Carefully use a sharp knife or scissors to cut open the toy along the seam. Be sure to cut along the edges of the seams and not too deep, so as not to damage the squeaker inside.

Step 2: Locate the Squeaker  

Once you have opened up the toy, locate the squeaker inside. It will be a small round disc with a metal or plastic covering. The squeaker should be easily visible and can be removed with your hands.

Now that you have located the squeaker, gently remove it by pulling at the edges. If there is a metal covering on the squeaker, use a pair of needle nose pliers to pry off the cover carefully and then grab onto the edges of the squeaker with your fingers or pliers to pull it out.

Step 3: Clean the Toy

Once you have removed the squeaker, clean the inside of the toy with a damp cloth to remove any debris or dirt that may have been left behind. Allow the toy to dry before putting it back together. Replace all the pieces and seams of the toy, ensuring they are secure. Use a sewing machine or needle and thread to stitch the pieces back together if necessary.

Dry Before Putting It Back Together

Step 4: Discard the Squeaker

Place the squeaker safely away from your pet, as it can be hazardous if swallowed. Alternatively, you can discard it in the trash if you are sure it won’t be eaten. If desired, you can purchase a new squeaker to put back into the toy. This can be done by finding a similar-sized replacement or purchasing one from an online retailer.

Step 5: Test the Toy

Once you have replaced the squeaker, make sure it works properly by pressing on it to ensure it makes a noise. If everything is in working order, your toy is now ready for use. It’s important to keep an eye on your pet when playing with the toy to ensure they don’t try to chew it open again or swallow any pieces. 

You Can Check It Out To How to Fix Broken Plastic Toys

Tips for How to Remove Squeaker From Dog Toy 

  1. Make sure the dog toy is powered off before taking it apart.
  2. Use a pair of scissors to carefully cut away any fabric or plastic covering the squeaker device.
  3. If possible, use needle-nose pliers to remove any remaining fasteners on the toy’s exterior.
  4. Use a screwdriver or butter knife to pry the squeaker out of its casing, being careful not to damage the toy itself.
  5. If the squeaker is attached with glue, try using a small flathead screwdriver to separate it from the toy’s surface.
  6. If the squeaker is stuck, use a spray lubricant to loosen it.
  7. If the squeaker doesn’t come out, do not force it—instead, replace the entire toy.
  8. To prevent breaking the plastic or fabric covering the device, wrap a piece of cloth around the outside before attempting to pry out the squeaker.
  9. Use caution when handling sharp edges on the toy’s casing and fabric, as these can cause injury.
Butter Knife to Pry the Squeaker Out

How Can You Prevent Squeakers From Being Swallowed by Your Dog in the Future?

Once you have removed the squeaker from your dog’s toy, there are steps you can take to ensure that your pet does not swallow any more of these items. First, make sure to inspect your dog’s toys regularly for signs of wear and tear.

If there are any loose parts or openings in the toy, it is best to discard it immediately. Never give your dog a toy with small parts, strings, or ribbons, as these can easily be swallowed.

You should also consider buying toys made from durable materials such as nylon and hard rubber. These materials are less likely to break apart and create a choking hazard. Also, avoid giving your dog any toys containing stuffing, as this can be a choking hazard.

Finally, if your dog does manage to get their mouth around the squeaker, it is best to remove it immediately and dispose of the toy. If possible, try to provide supervision when your pet plays with any toy to reduce the chances of swallowing any foreign objects.

You Can Check It Out To How to Lower Halo Bassinest

Are There Any Special Considerations for Removing a Squeaker From a Plush Toy or Another Soft Material?

Yes. Some extra considerations should be taken when removing a squeaker from a plush toy or other soft material. Plush toys may contain small pieces of plastic that can be sharp and dangerous if handled improperly.

Rip the Fabric When Carefully Cutting Away

Additionally, it is important to take care not to rip the fabric when carefully cutting away the seam that holds the squeaker in place. When using a knife, use the dull side and make sure to cut away from your body.

Finally, after removing the squeaker, inspect all pieces of fabric for any stray parts or sharp edges before giving the toy back to your pup. Taking these extra steps can ensure that your dog’s toy is safe to play with again.

You Can Check It Out To How to Use Halo Bassinest

How Do You Clean and Sanitize a Dog Toy After the Squeaker Has Been Removed? 

Once the squeaker has been removed from a dog toy, it’s important to clean and sanitize it before giving it back to your pet. The most effective way of cleaning these toys is by using hot water and mild detergent.

Start by filling a sink with warm water and adding a few drops of mild dish soap or detergent. Submerge the toy completely in soapy water.

Use a soft-bristled brush to scrub away any dirt, grime, or remaining pieces of squeaker material from the toy. Once the toy has been cleaned and rinsed off in warm water, you can sanitize it. To do this, mix together 1/4 cup of chlorine bleach with one gallon of hot water in a large bucket and submerge the toy in the solution. Let it soak for 5-10 minutes before rinsing off the toy with clean water.

Once clean, allow the toy to air dry completely before giving it back to your pet.  This will ensure that the toy is safe and free of any bacteria or dirt.  Make sure to replace the squeaker if necessary, as this can provide hours of fun for your pet.

Is It Necessary to Call Any Professional to Remove Squeaker From Dog Toy?

No, calling a professional to remove the squeaker from your dog’s toy is unnecessary.  It can easily be done at home with a few simple tools. The first step is to locate the squeaker inside the toy, as it may not be immediately visible.

Depending on the type of toy, it may be necessary to cut through fabric or felt layers before you can access the squeaker. Be sure to use sharp scissors designed for the fabric to avoid damaging the toy.

You Can Check It Out To How to Clean Sticky Hand Toy

 Use Sharp Scissors Designed for the Fabric

The cost of hiring a professional to remove a squeaker from a dog toy can vary depending on the complexity of the task and the experience of the person doing it.

Generally, you can expect to pay anywhere from $20-$50 for this service. It is important to choose someone with good knowledge and experience in dealing with these types of tasks to ensure the job will be done right.


Removing a squeaker from a dog toy is not always easy, but it can be done with the right tools and techniques. It’s always best to use caution when removing a squeaker from a dog toy and follow these steps carefully, as some materials may pose safety risks or be sharp enough to cause injury. 

Also, never leave your dog unsupervised with a toy with its squeaker removed. Now that you know how to remove a squeaker from a dog toy, you can ensure that your pup’s toys remain in a safe condition and free of potential choking hazards.

I hope this article has been beneficial for learning how to remove squeaker from dog toy. Make Sure the precautionary measures are followed chronologically.

You Can Check It Out to Make a Diaper Out of Maxi Pads

Photo of author

Loren Jones

Hi, my name is Loren. I live with my husband and 4 lovely kiddos in the Eastern part of San-fransisco. I have a smart beautiful,curious 6 year old daughter, a handsome 11-year-old son, an intelligent and tech geek 15 years old son and a creative, artistic 12-year-old stepson. With each of my kids being five years apart, I feel that I’m now continually phasing in and out of each stage of parenting! I’ve learned a lot about the way children learn and behave, especially in a school setting with regards to curriculum. I enjoy sharing that insight through my writing and hope that it can help others.