How to Shut Off Owlet Sock

Knowing how to shut off your Owlet Sock is an important skill for any parent. The Owlet Sock monitors a baby’s heart rate and oxygen levels, alerting parents if these values fall out of the normal range. This kind of monitoring can give parents peace of mind, but it needs to be turned off at night or when the baby isn’t being monitored, otherwise, it can become a distraction or even dangerous if the baby’s movement is not detected or changes unexpectedly.

How to Shut Off Owlet Sock

One of the biggest advantages of shutting off the Owlet sock is that it can help save battery life. When an Owlet Sock is not in use, it automatically shuts off after a certain period, which helps conserve battery power. As a result, you don’t have to worry about recharging your device as often or replacing batteries every few months. In this blog post, You will learn in detail how to shut off owlet sock.

Step by Step Processes for How to Shut Off Owlet Sock

Step 1: Inspect the Bottom

Before turning off the Owlet Sock, ensure it is powered off. Check the bottom of the sock to ensure that the power button is not illuminated. If it is, press and hold down on it for a few seconds until it turns off.

Check the 
Bottom of the Sock

Step 2: Remove the Battery Pack

The battery pack must be removed from the base station before turning off the Owlet Sock. To do this, turn the base station over and locate the battery compartment. Push down on the latch to open it and take out the battery pack. Next, disconnect any power cables connected to your Owlet Sock. These cables allow electricity to flow from the main unit to the Owlet Sock.

Step 3: Remove Sensor Pads

After that, remove the sensor pads from your base station and Owlet Sock. These can be found on both sides of the unit and should be gently pulled away before you turn off the device. Ensure your Wi-Fi and Bluetooth are turned off before turning off your Owlet Sock. This will ensure that the device does not try to reconnect after being powered off.

Step 4: Make Sure All Power Sources are Disconnected

Before turning off the Owlet Sock, ensure all power sources have been disconnected from the unit. This includes the power cable and any other cords that may be connected to it. Once all power sources have been disconnected, unplug the power cord from the wall outlet. This will ensure no electricity flows to your Owlet Sock after you turn it off.

Ensure All Power Sources 
Have Been Disconnected

Step 5: Press and Hold the Power Button

Finally, hold down on the power button for a few seconds until it turns off. This should be done after completing all other steps to ensure that the device is completely powered off. After turning off your Owlet Sock, store it away from direct sunlight and extreme temperatures. This will help keep it working properly for years to come.

Step 6: Check For Updates

Before using your Owlet Sock again, check for any updates or patches that may be available. This will ensure the device runs on the latest software and can better monitor your baby’s health.

These steps will help you turn off your Owlet Sock properly and safely. Keep in mind that it is important to disconnect all power sources, such as the power cable, before turning off the device.

Safety Tips for How to Shut Off Owlet Sock

  1. Always turn off the Owlet Sock before changing your baby’s diaper or clothes, as it may cause unnecessary discomfort.
  2. Ensure all power cords and accessories are properly disconnected from the Owlet Sock before turning it off.
  3. Take extra care when handling the Sock since it is very delicate and easily damaged.
  4. When shutting off the Owlet Sock, always use two hands to ensure a secure grip while turning it off.
  5. Always store the Sock in a dry place away from direct sunlight or any moisture-prone area, such as a bathroom or laundry room.
  6. Make sure to unplug the power cord of the Owlet Sock before you try to shut it off.
  7. Do not leave the Owlet Sock unattended while switched on, as this may be a potential safety hazard for your baby.  Always turn off the Sock after every use and store it away from your baby’s reach.  

By following these safety tips, you can ensure your baby’s safety while using the Owlet Sock. With these precautions, you can rest assured that your baby is safe and secure.

Always Store the 
Sock in a Dry Place

How Long Does It Take for an Owlet Sock to Power Down After Being Turned Off? 

When you turn off your Owlet Sock, it takes about 10 seconds for the power to shut down completely. This is because the sock needs to go through a process of safely and gradually shutting down its internal systems. Sometimes, the sock may take slightly longer to shut down due to external factors such as temperature or air pressure in the room. However, the power should take 30 seconds to shut off completely.

If you’re experiencing any issues with your Owlet Sock or find it’s not powering down after being turned off, contact support for assistance. The team is available 24/7 and can provide more information on how to shut off the sock properly and ensure it’s powered down completely. Whether you’re using the Owlet Sock for yourself or a family member, it’s important always to ensure the power is off when unused. This will help protect your device and keep it from being damaged by extended exposure to temperature or air pressure changes.

Is It Safe to Unplug an Owlet Sock?

The Owlet sock is a smart baby monitor that keeps track of your infant’s heart rate and oxygen levels while they sleep. It uses an innovative pulse oximetry design for accuracy and safety, but some parents might be concerned about unplugging the device. It is safe to unplug an Owlet Sock at any time. The device runs on low wattage, so there is no risk of electric shock or damage to the plug. Moreover, the Owlet sock’s battery will not be drained by unplugging it. The device requires an initial charge before use, but it can remain plugged in indefinitely.

The process is simple if you need to shut off your Owlet Sock. Unplug the power cord from its base station, and the device will automatically turn off. You can also press and hold the button on the base station until it powers down. When unplugging an Owlet Sock, be sure to follow safety protocols. Do not pull directly on the plug or cable when disconnecting it from the wall. Always use two hands to pull it away from the power source, reducing the risk of damage or electric shock.

Are There Any Risks Associated With Shutting Off an Owlet Sock? 

Shutting off an Owlet Sock may present some risks, although we strongly advise against it. If the Owlet Sock is shut off while your baby sleeps, you cannot monitor their heart rate and oxygen levels throughout the night. This could delay any intervention needed during an emergency. It could also lead to false alarms if the Owlet Sock is suddenly restarted, as the base station may not sync properly with the sensor. Finally, shutting off an Owlet Sock may cause it to malfunction if done repeatedly over time.

It is important to follow all manufacturer’s instructions carefully when shutting off your Owlet Sock to minimize the risks associated. Always ensure the sensor is turned off completely and not just put into sleep mode. Keeping the Owlet Sock running through the night is also advised to monitor your baby’s vital signs continuously. Please contact a healthcare professional if you have any other questions or concerns about shutting off an Owlet Sock.

How Often Should You Shut Off Your Owlet Sock?

The Owlet Sock is designed to be worn continuously throughout the day and night, but it can occasionally be necessary to shut off the device. Shutting off your Owlet Sock should only be done infrequently and when necessary. You may need to shut off the sock if you want to perform a product reset or if you notice that your readings are not accurate.

Before shutting off your Owlet Sock, consult the manual provided. This will ensure that you know the device’s specific shut-off procedure and how to operate it after shut-off properly. Generally, make sure you completely power down the sock by pressing the button on the back of the device for at least 8 seconds or until the LED light turns off. It is important to note that when you power down your Owlet Sock, it will not be able to collect any data, and your readings may temporarily stop updating in the app. It is best only to shut off the device if necessary since this could affect the accuracy of your results.

Owlet Sock is Designed to Be Worn Continuously

Conclusion

One of the disadvantages of shutting off Owlet Sock is that it can be difficult for parents or caregivers to access the device to turn it off. This is because the owlet sock is designed to be worn on a baby’s foot, and depending on their foot size, accessing or even seeing the button may be an issue.

In conclusion, shutting off your Owlet sock is a simple process involving removing power from the device. To do so, simply unplug the USB cable from the wall outlet and keep it away from any liquids or objects that might cause damage. 

If your Owlet sock has an internal battery, discharge it before storage fully. Reading this post has helped you learn how to shut off owlet sock. Make sure the safety precautions are carried out in the order listed.

Photo of author

Loren Jones

Hi, my name is Loren. I live with my husband and 4 lovely kiddos in the Eastern part of San-fransisco. I have a smart beautiful,curious 6 year old daughter, a handsome 11-year-old son, an intelligent and tech geek 15 years old son and a creative, artistic 12-year-old stepson. With each of my kids being five years apart, I feel that I’m now continually phasing in and out of each stage of parenting! I’ve learned a lot about the way children learn and behave, especially in a school setting with regards to curriculum. I enjoy sharing that insight through my writing and hope that it can help others.

Leave a Comment